Site Map
  Site Search



       
Cell Configurator

  Amperage

  Bob Boyce

  Browns Gas

  Bubblers / Tanks

  Buying a Cell

  Calculate MPG

  Cell Assembly

  Cell Spacing

  Cold Fog

  Cold Weather Tips

  Conditioning Plates

  Digital Amp Gauge

  Digital Volt Gauge

  Driving Tips

  Dry Cells

  Dry Cell - Tube

  EFIE Circuit

  Electrolytes

  Engine Animation

  Featured Cells of
  Craftsmen   

  Flashback Arrestor

  Foam

  Gas Saving Tips

  Gasoline vs Alcohol

  Go-no-Go Switches

  HELP & Support

  HHO Pressure Test

  HHO --- Why ?

  How HHO Works

  Hydrogen

  Installation Tips

  Jar Cells

  Magnetic Alignment

  My Dashboard

  Neutral Plates

  NEWS

  O2 Sensor

  OBD I & II

  Plasma Spark

  Plastic Containers

  Pure-Gas.org

  PWM

  Questions

  Safety

  Solar Power

  Stan Meyers

  Tax Incentives

  Water

  Water as Fuel

  Wire Size

  Wire Cell

2nd Amendment

Black Powder Making

Build a Wood Tree Stand

Moonshine Stills

Hemp Revolution

Martin vs Zimmerman

 

Electrical Polarization of the Water Molecule
by Stan Meyer

   
 

It is already known that the hydrogen and oxygen atoms by themselves may take on electrical charges. But until now, no one discovered that by simultaneously exposing the water molecule to one positively charged and one negatively charged electrical voltage zone, the unlike hydrogen and oxygen atoms assume opposing electrical characteristics, equal in magnitude and potential, thereby stabilizing the electrical polarity of the water molecule into existence. In the water molecule, the two hydrogen atoms take on a positive (+) electrical charge and the one oxygen atom takes on a negative (-) electrical charge, thereby satisfying the two basic laws of physics... for every action there is an equal and opposite reaction, and that all things must reach a stable state.

Although the molecule is stabilized in electrical polarity by the simultaneous application of the two oppositely charged voltage zones, the bond between its atoms is greatly weakened in this process. The positively charged hydrogen atoms are attracted to the negatively charged voltage zone, and the negatively charged oxygen atoms are attracted to the positively charged voltage zone... satisfying the opposite polarity attraction law of physics.

Electrical Polarization Process
Simply, the electrical polarization of the water molecule is basically a four step process.

  • First, oppositely charged electrical voltage zones are simultaneously introduced to either side of the water molecule.
  • Secondly, the water molecule becomes electrically polarized (electrically charged).
  • Thirdly, this electrical polarization of the hydrogen and oxygen atoms greatly weakens the stability of the water molecule.
  • Finally, because the voltage zones are still present with their opposite electrical attractions, the water molecule is split into its component parts. The hydrogen and oxygen atoms separate, with the hydrogen being attracted to the negative electrical voltage zone, while the oxygen is attracted to the positive electrical voltage zone... all simultaneously.

Covalent Break-up of the Water Molecule
In scientific terms, once the electrical polarization process occurs, the covalent bonding or sharing of electrons between atoms of the water molecule ceases to exist since the positive electrically charged hydrogen atoms attract the free floating negative charged electrons; while, at the same time, the negatively electrically charged oxygen atom repels the moving electron.... thereby stabilizing the energy level of the atoms... separating the water molecule into its component parts.... releasing energy in the form of hydrogen gas and oxygen gas. The opposite polarity attraction that now exists between the liberated electrically charged atoms and the stationary electrical voltage zones further aids the splitting process. The repetitive pulse voltage frequency potential, or reforming voltage zones, continue the electrical polarization process.

What is so dramatic about disassociation of the atoms in the water molecule is the ease at which the task is done. Because the bond between the hydrogen and oxygen is already greatly weakened by the electrical polarization of the water molecule, very little energy in the form of applied voltage is need to actually separate the hydrogen and oxygen atoms. The hydrogen and oxygen atoms that make up the water molecule are already seeking to move in opposite directions because of their respective attractions to the opposite electrical voltage zones. A minute amount of voltage, a potential energy without amperage consumption, gives the atoms the impetus to break away from one another in a strictly physical process. Hydrogen and oxygen gases are released in great amounts with little energy being consumed and without chemical interaction. Once the splitting of the molecule occurs, the liberated hydrogen and oxygen atoms will not recombine in the polarization process. Therefore, the gas can be utilized for energy consumption.

Natural Water, the source for hydrogen
Under actual lab certification testing, it is shown that by utilizing pulse voltage frequency potential, splitting of the water molecule occurs in all natural water, even distilled water.

The Formation of Voltage Zones
After it was discovered that the hydrogen and oxygen atoms in natural water could be electrically charged, all that was needed was the creation of two electrical voltage zones, opposite in electrical polarity, placed on either side of the water molecule. simply by applying voltage potential, the oxygen atom, now with a negative (b-) electrical charge, is attracted to the positive (b+) electrical voltage zone. Like wise, the hydrogen atoms, now with a positive (b+) electrical charge, are attracted to the negative (b-) electrical voltage zone. In the repetition of this process, the water molecules are being split, releasing oxygen gas and energy in the form of hydrogen gas.

In order to capitalize on the electrical polarization of the water molecule and maximize the release of hydrogen energy, it is imperative that the process take place in a non-chemical environment. Stressing that this is simply a physical process, only natural water is utilized without any additives or chemicals. The voltage zones used are two non-oxidizing, non-corrosive, non-reactive housings. Voltage, or potential energy, flows across the exciter plates, one plate being positive (b+) electrically charged and one being negative (b-) electrically charged. Voltage moves across the plates, but the flow of amperage is restricted. Since almost no amperage flows across the zones, the process remains chemical free and energy consumption in the process is extremely low. The electronic circuit interfacing determines how the amps are restricted. Contaminants in natural water remain contaminants and have no effect upon the electrical polarization process.

Voltage is Potential Energy
In the electrical energy equation, Power = Amps X Voltage, voltage becomes potential energy since the flow of amps is restricted across the plates. Since the Fuel Cell uses voltage potential (remember, voltage is pressure or force within an electrical system called potential; unlike charges attract while like charges repel; voltage potential is used to electrically charge the atoms to disrupt the electron flow, covalent bonding, between the atoms) to economically split the water molecule, very little power is being used to release a terrific amount of energy. The hydrogen being released is two and a half times more powerful than gasoline. The Fuel Cell simply releases stored energy from natural water economically.

The pulse voltage frequency generators, I use, are relatively small in comparison to a conventional amp generator. The low-cost features of the Fuel Cell make the system ideal for utilization: it uses free water, simply does not decompose during operations, and uses voltage potential that is not consumed during hydrogen gas production. These economic features of the Fuel Cell now establish natural water as a new, free, and abundant energy source. After all, three-fourths of the earth's weight is hydrogen gas. Furthermore, using natural water requires no refining process, no distribution network, nor special packaging.

Producing Hydrogen On Demand
Until now, voltage potential has been used in two ways to operate the fuel cell: electrically charging the atoms of the water molecule to disrupt covalent bonding of the water molecule and to separate the liberated atoms for utilization. another aspect is to attenuate the voltage potential to generate hydrogen gas on demand. This is simply done by manipulating the parameters of the voltage zones.

.

 

One technique to control gas production is to physically move the voltage zones, or plates, closer together, while keeping the voltage potential constant. Moving the voltage zones closer together causes a greater electrical force to be applied to the electrical polarization process.... causing hydrogen to be produced exponentially.

 

 

 

.

.

 

Another way to control the hydrogen gas production is to maintain the electrical voltage zones in a fixed position, and increase the intensity of the electrical voltage potential across the zones. Again, hydrogen gas is produced exponentially as voltage potential increases. The pulse voltage frequency potential is used to help restrict amp flow during the electrical polarization process. Voltage potential may be increased to any desired level to meet hydrogen gas production on demand. Zero to 20,000 volts range is quite normal at any frequency level.

 

 

 

 

.

 

.

 

Also, gas production is greatly manipulated by changing the physical design characteristics of the voltage zones (voltage zones taking on the shape of the exciter plate.... skin effect). This includes increasing the size (height or width or diameter) of the zones, and/or the shape and configuration of the zones.

 

 

 

 

 

 

 

.

 

 

Finally, gas production is greatly manipulated by simply switching on and off, or pulsing, the electrical voltage zones in a variable, repetitive manner. The higher the frequency of the voltage pulse, the greater the production of gas.

 

 

 

 

 

 

.

 

Coupled with this voltage pulsing is "segmentation". The voltage zones may actually be segmented, with areas of the zones physically removed at a given point. This reduces gas production. When the segments are reintroduced inside the Fuel Cell, gas production increases.

 

 

 

 

 

.

 

 

By combining these voltage potential parameters into a functional control system, the Fuel Cell now becomes a constant demand generator. As energy is needed, simply vary the voltage potential parameters to meet the need. The Fuel Cell, therefore, needs no secondary storage system since hydrogen is being stored in the safest storage medium know to man until used..... water. Can you not use water to extinguish a fire?

 

 

Mega Watt Gas Yield

The previous method of producing hydrogen gas via the application of voltage potential (pressure or force within an electrical system) is quite efficient, but there are several advance steps to the ELECTRICAL POLARIZATION PROCESS that increase hydrogen gas energy production astronomically from natural water. This is simply don through the use of a Resonant Cavity Fuel Cell.

Resonant Action and the Phenomena
The Resonant Action within the Fuel Cell occurs in a systematic way. First an oscillating voltage field, or zone, is formed around a second oscillating voltage field, or zone, opposite in electrical polarity and forming a water zone in between. The two oscillating voltage zones are synchronized into a single repetitive wave form. As the water molecules are exposed to the reforming voltage zones, the hydrogen atoms become positively electrically charged while the oxygen atom becomes negative electrically charged..... electrically polarizing the water molecule. The pulsating voltage zones also help restrict amp flow during the electrical polarization process.

Once the electrical polarization phenomenon occurs, the covalent bonding, or sharing, of electrons between atoms of the water molecule ceases to exist since the positive electrically charged hydrogen atoms attract the free floating negative charged electrons while, at the same time, the negative electrically charged oxygen atom repels the moving electrons..... thereby stabilizing the energy levels of the atoms.... separating the water molecule into its component parts..... releasing energy in the form of hydrogen gas and oxygen gas. The opposite polarity attraction that now exists between the liberated electrically charged atoms and the stationary electrical voltage zones further aids the splitting process by imparting a physical impact (particle impact) on neighboring molecules undergoing the electrical polarization process.

Since the voltage zone that forms the resonant cavity outer wall momentarily entraps the liberated atoms, the moving atoms are accelerated and deflected among other molecules being split... causing compound action. This compounding action continues to increase as more atoms are being liberated from other water molecules. The repetitive pulse voltage frequency potential continues the compounding action, whereas an increase in voltage amplitude speeds up the compounding action under controlled means. Simply moving liberated atoms back and forth uniformly through the electrical polarization process in repetitive manner establishes Resonant Action within the Fuel Cell.

Resonant Action Enhancement
Resonant Action enhancement beyond the influence of pulse voltage potential is accomplished in several ways. In the area of electron deflection, the electrically charged atoms moving toward the water molecules further disrupt the covalent bonding, while at the same time increasing the electrical charges inside the Fuel Cell during the electrical polarization process. Increasing the number of electrically charged atoms within the Fuel Cell directly increases the voltage charges within the same cell while applied pulse voltage frequency potential remains the same.... increasing gas yield while power input remains constant.

In terms of design application, the resonant cavity is multi-tier with other resonant cavities of similar design in a sequential manner. As the electrical polarization process occurs, the liberated and electrically charged atoms are recycled inside the resonant cavity prior to atom injection into the next cavity-structure undergoing the same recycling process. The orderly and sequential progression of the moving charged atoms through the cavity-array increases the voltage charges per stage since more atoms are being allowed to interact with each proceeding stage. To increase gas yield even further, additional atom recycling cavities are affixed to the vertical array to meet a predetermined gas need.

The interaction of the laser beam or light energy with the liberated atoms inside the resonant cavity during the electrical polarization process causes the free floating atoms to either lose or gain electrons.... causing said atoms to become electrically charged and used to herein described. The expelling charged atoms are used in conjunction with the electrical polarization generator to form the regenerative energy feedback network. This process simply uses the component parts of water to produce electricity without consuming the charged atoms prior to gas ignition.

 

   
   
   
   

Hit Counter

    Copyright 2003   All rights reserved.   Revised: 09/23/14.                                             Web Author, daddyo44907
The information presented on this web site is for information purposes only. Should you decide to perform experiments or construct any device, you do so wholly on your own responsibility
-- Neither the company hosting this web site, nor the site designer author are in any way responsible for your actions or any resulting loss or damage of any description, should any occur as a result of what you do.